Experimental Techniques in Chemistry Short Questions with Answers
Here are Short Questions with Answers for chapter 2 i.e Experimental Techniques in Chemistry for FSc. Pre medical and Pre engineering students for all boards of intermediate and secondary education Pakistan.
SHORT QUESTIONS WITH ANSWERS
Q.1 Define analytical chemistry ?
Ans.
The branch of chemistry which deals with the qualitative and quantitative analyses of sample is called analytical chemistry.
Q.2 Define analysis and analyte ?
Ans. Analysis:
The determination of the composition of a sample is called analysis.
Analyte:
The sample being analyzed is called analyte.
Q.3 Differentiate between qualitative and quantitative analysis. What is analytical data ?
Ans. Qualitative analysis:
The analysis which deals with the detection or identification of the elements present in a compound is called qualitative analysis. It includes salt analysis and detection of functional groups.
Quantitative analysis:
The analysis in which the relative amounts of constituents are estimated is called quantitative analysis. For example combustion analysis.
Analytical data:
The results obtained by qualitative and quantitative analysis are called analytical data.
Q.4 Name the experimental techniques for purification of substances ?
Ans.
(1) Filtration.
(2) Crystalization.
(3) Sublimation.
(4) Solvent Extraction.
(5) Chromatography.
Q.5 Define filtration ?
Ans.
The process in which the insoluble particles are separated from the liquid by passing through several types of filter media is called filtration.
Q.6 Define the following.
(i) Filter (ii) Filtrate (iii) Residue
(iv) Filter Medium.
Ans. Filter:
Any water insoluble porous material having measurable degree of rigidity is called filtrate.
Filtrate:
The liquid which after passing the mixture through filter medium is collected is called filtrate.
Residue:
The solid left behind on the filter medium during filtration is called residue.
Filter medium:
The porous material used for filtration is called filter medium. It may be filter paper, cotton, woven wire, cloth etc.
Q.7 Give reasons that the funnel in filtration should be several inches long ?
Ans.
The stem of the funnel should be several inches long so that it can extend a few centimeters down into the receiving beaker and tip should touch the side of beaker in order to avoid splashing.
Q.8 Discus the points should be kept in mind during the folding of the filter paper ?
Ans.
1. Filter paper should be folded twice. The first fold should be along the diameter, and the second fold should be such that edges do not quite match.
2. Folded filter paper should be open slightly on the larger section. This provides a cone with three fold thickness half way and one thickness the other half way round.
3. The apex angle is greater than 60o.
4. The paper may be inserted in to 60 degree funnel moistened with water and firmly pressed down.
Q.9 Rate of filtration through funnel can be increased by using a fluted filter paper why ?
Ans.
A fluted filter paper is prepared by folding ordinary filter paper in such a way that fan like arrangement with alternate elevation and depression at various folds is formed.
Q.10 Differentiate b/w Gooch crucible and sintered glass crucible.
Ans.
(i) The filtering process can be done of the Gooch crucible is placed in suction filtering apparatus. But in filtration by sintered glass crucible no preparation is needed.
(ii) The reagents which react with paper e.g. HCl, KMnO4 etc. Cannot be filtered through Gooch crucible. But reactive solution like HCl, KMnO4 can be filtered with out any alteration in the sintered crucible.
(iii) Gooch Crucible for filtration of such types of precipitates which need to be heated at high temperature. But in sintered crucible while collecting the residue there is no contamination of filter paper.
Q .11 Define crystallization.
Ans.
The removal of a solid from solution by increasing its concentration above the saturation point in such a way that the excess solid separates out in the form of crystals is called crystallization.
Q.12 What is the principle of crystallization?
Ans.
The basic principle of crystallization is the fact that solute should be soluble in a suitable solvent at high temperature and the excess amount of the solute is thrown out as crystals when it is cooled.
Q.13 What is the objective of crystallization ?
Ans.
The preparation of chemical compound usually has a crude product and there is a need to purify it by crystallization from a suitable solvent
Q.14 Name the solvents commonly used for crystallization.
Ans.
The solvents which are mostly used for crystallization are, water, rectified spirit, (95% ethanol), absolute ethanol, diethylether acetone, chloroform, carbon tetrachloride, acetic acid and petroleum ether.
If none of the above solvents is found suitable for crystallization, a combination of two or more miscible solvents may be employed.
Q.15 Describe the preparation of saturated solution ?
Ans.
After selecting a suitable solvent the substance is then dissolved in a minimum amount of solvent and is heated directly or on a water bath with constant stirring. Add more solvent to the boiling solution, if necessary until all the solute has dissolved.
Q.16 What are the safe and reliable methods for drying the crystals ?
Ans.
1. Drying through vacuum desiccator
A safe and reliable method of drying crystals is through a vacuum desiccator. In this process the crystals are spread over water glass and kept in a vacuum desiccator for several hours. In the desiccator CaCl2, silica gel or P2O5 are used as drying agents
2. Drying in an oven
The crystals are dried in an oven provided the substance does not melt or decompose on heating at 1000c.
Q.17 How the undesirable colours are removed in crystals ?
Ans.
Sometimes during the preparation of crude substance, the colouring matter or resinous products affect the appearance of product and it may appear coloured. Such impurities are conveniently removed by boiling the substance in a solvent with the sufficient quantity of finely powdered animal charcoal and the pure decolourized substance crystallizes out from the filtrate on cooling.
Q.18 Define mother liquor? How the crystals can be obtained from mother liquor ?
Ans.
The remaining solution after the formation of crystals is called mother liquor.
1. The mixture of crystals and mother liquor is filtered through a Gooch crucible connected with a vacuum pump.
2. After full suction to drain the mother liquor as effectively as possible. When the filter is rigid enough it is pressed carefully but by firmly by means of a cork in order to drain the left over liquid.
3. The crystals are then washed will small portion of cold solvent repeating this process many times.
4. The crude mother liquor is concentrated by evaporation and it get good crops of crystals.
Q.19 Define sublimation.
Ans.
When substance is heated it goes directly in to vapours without passing through the liquid state and vapours thus formed are condensed back it form the solid on cooling once again with out passing though liquid state is called sublimation.
Examples of such solids are iodine, ammonium chloride, naphthalene , benzoic acid and camphor.
Q.20 What is sublimand ?
Ans.
The compound which is sublimed is called sublimand.e.g In the mixture of benzoic acid in sand, benzoic acid is sublimand.
Q.21 What is the main function and limitation of sublimation ?
Ans.
By this process of sublimation certain substance can be purified. It is only suitable for those substances which have high V.P than their melting point.
Q.23 What is solvent extraction? When it is applicable ?
Ans.
It is a technique, in which a solute can be separated from a solution by shaking the solution with a solvent in which the solute is more soluble and added solvent does not mix with the solution.
The technique of solvent extraction is mostly applied to separate organic compounds from water.
Q.24 What is the most common solvent in solvent extraction method? Why we choose ether in solvent extraction?
Ans.
The common solvent is ether in the solvent extraction we choose ether in the solvent extraction because ether layer is separated and organic product is obtained by evaporating ether repeated extractions using small portions of solvent ether are more efficient than using single but larger volume of solvent.
Q.25 State distribution law or partition law ?
Ans.
Distribution law:
This law states that a solute distribute itself between two immiscible liquids in a constant ratio irrespective of the amount of solute added.
The ration of the amounts of solute dissolved in two immiscible liquids at equilibrium is called distribution coefficient.
Distribution coefficient KD =
Q.26 Discuss the importance of solvent extraction method.
Ans.
Separation can be carried out on macro as well as micro level.
2. There is no need of any instrumentation except separating funnel.
3. It can be used for preparation, purification and analysis on all scales of working.
Q.27 Define chromatography? What is the principle of chromatography?
Ans.
Chromatography is a technique used for separating the components of a mixture. These components are separated due to the relative affinity for stationary phase and mobile phase.
Q.28 Define and explain, stationary phase and mobile phase.
Ans.
Stationary phase:
The phase over which mobile phase flows in chromatography is called stationary phase.
The stationary phase may be a solid or liquid supported on a solid. It adsorbs the mixture under separation.
Examples of stationary phase are silica gel, alumina and filter paper etc.
Mobile phase:
The solvent or mixture of solvents for this separation of components is called mobile phase.
The mobile phase may be liquid or gas and while passing one the stationary phase, competes with it for the constituents of mixture.
Examples of mobile phase are, water, ethanol, ethanoic acid and propanone (acetone) etc.
Q.29 What is the principle of chromatography ?
Ans.
The principle involved in the chromatography depends upon the relative solubilities of the components, between the two phases. The distribution of the components mixture between the two phases is governed by the distribution coefficient KD, which is ratio of component in mobile phase to the concentration of component in stationary phase.
KD =
Q.30 What is the importance of distribution coefficient ?
Ans.
(i) The component of a mixture with a small value of KD mostly remains in the stationary phase as moving phase flows over it.
The component with a greater value of KD remains largely dissolved in the mobile phase and passes over the stationary phase quickly.
Q.31 Differentiate between adsorption chromatography and partition chromatography ?
Ans. Adsorption chromatography:
Type of Chromatography in which the stationary phase is solid, is called adsorption chromatography. Example of this chromatography is Thin layer chromatography.
Q.32 What is partition chromatography ?
Ans. Partition chromatography:
Type of Chromatography in which the stationary phase is liquid is called partition chromatography. Example of this chromatography is paper chromatography.
Q.33 Define and explain paper chromatography ?
Ans.
It is a technique of partition chromatography in which the stationary phase is water adsorbed on a paper. The mobile phase is usually an organic liquid.
In paper chromatography the adsorbed water behaves as an immiscible liquid towards the mobile phase, which passes over the paper.
Q.34 Name the different ways of paper chromatography.
Ans.
There are three ways of carrying out paper chromatography.
(i) Ascending chromatography
(ii) Descending chromatography
(iii) Radial/Circular chromatography.
Q.35 What do you mean by Rf value?
Ans.
Each component has specific retardation factor called Rf value. Rf value is related to distribution coefficient and is given by
Rf =
Q.37 What is chromatogram ?
Ans. Finished or Devolped paper obtained after Chromatography is called Chromatogram:
Q.38 Name the types of chromatography on the basis of phase.
Ans.
There are four types of chromatography.
(i) Liquid–liquid chromatography
(ii) Liquid–solid chromatography
(iii) Gas–liquid chromatography
(iv) Gas–solid chromatography
Q.39 Give uses of chromatography.
Ans.
The techniques of chromatography is very useful in organic synthesis for separation, isolation, and purification of the products.
Mostly used for the separation of amino acids.
Q.40 Why is there a need to crystallize the crude products ?
Ans.
When a chemical compound is synthesised, it is crude product. Therefore, there is need to purify the compound. This is done by crystallizing the compound.
Q.41 A water soluble organic compound aspirin is prepared by the reaction of salicylic acid with a mixture of acetic acid and acetic anhydride. How will you separate the product from the reaction mixture ?
Ans.
During the preparation of aspirin, it is obtained as only liquid which can be separated by solvent extraction technique using a non–polar solvent like CCl4 and mixture is transferred to separating funnel where only layer is separated.
Q.42 A solid compound is soluble in water as well as in chloroform. During its preparation it remains in aqueous layer. Describe a method to obtain it from the layer.
Ans.
The compound can be extracted by solvent extraction technique. As it is mentioned that compound is soluble in polar solvents (water, chloroform). If a non–polar solvent is mixed and the mixture is transferred to a separating funnel, where two layers are formed. By separating water layer and evaporating it, organic compound is obtained.
Q.43 why repeated extractions using small portions of solvent are more efficient than using a single but larger volume of solvent?
Ans.
It has been observed that repeated extractions using small portions of solvent are more efficient than using a single but larger volume of solvent. Because more product is extracted with more extractions using small portions of solvent.
Q.44 Write down the main characteristics of a solvent selected for the crystallization of compound.
Ans.
A solvent should have the following characteristics
1. It should dissolve a large amount of solute in its boiling part.
2. It should have not reaction with the solute.
3. It should neither dissolve the impurities, nor crystallize them with the solute.
4. It should be perfectly safe to use.
5. It should be easily removable.
6. It should be inexpensive.
0 comments:
Confused? Feel Free To Ask
Your feedback is always appreciated. We will try to reply to your queries as soon as time allows.